|
|
|
| GAMCHEK™ JR. INSTRUCTIONS |
|
|
Power Check
Plug GamChek Jr.™ male end into the circuit you are checking.
If no LED lights, there is no powe r - open hot. If an LED lights, match the LED configuration with the label to determine power status. |
 |
|
|
| GAM LAMPCHEK™ INSTRUCTIONS |
|
- To check for lamp continuity (incandescents only), plug the light fixture lead into the female end of the GAM LampChek™. The lamp is working if the green pilot light comes on.
- If the indicator does not show continuity, then you need to first check the lamp (bulb) to be sure that it is not burned out. If the bulb is good then you have a wiring problem.
|
 |
|
