Special Effects Accessory Case shall be manufactured to easily mount in the ETC Source Four™ fixed
angle lens Ellipsoidal spotlight (by others). It shall be manufactured using the identical mounting barrel
assembly component to insure proper and convenient fit. Case shall be manufactured from aluminum and some
steel components to minimize weight. Each of the fixed angle lenses from 5° to 90° (by others) shall be
interchangeable and mountable in the barrel. Barrel rotation shall be the same as found on the ETC Source
Four™ Ellipsoidal spotlight.
Special effects case shall be manufactured from sheet aluminum, 0.130 in. thick. Top shall be perforated to
allow airflow for cooling and light baffled shielding to eliminate light spill. Case is designed to receive a family of
effects cases that are interchangeable and simply slide into the case. There are two captive nuts for securing
the tray in place. The round barrel assembly component shall be cast aluminum. An automatic safety latch is
also provided. When the drawer slides past, it locks it in place automatically and the drawer may not be removed
unless the safety latch is mechanically pulled to release it.
The case shall weigh 6 lbs. 5 oz. (without effects tray) and 9 lbs. 10 oz. with effects tray. The overall dimension
shall be 11-5/16 in. wide, 10-5/8 in. high, and 9-1/2 in. deep. However, special effects case will only add 2-1/16
inches to the overall length of the original Ellipsoidal spotlight. Case will provide a drop-in iris slot. Finish on entire
unit shall be flat black powder coated. SX4®Housing Case shall be model number TS6200 as manufactured by
GAMPRODUCTS, INC. of Los Angeles, California.
SX4® With Shutters Option:
The Case with framing shutters shall weigh 7 lbs. 10 oz. (without FX/Tray) and 11 lbs. 2 oz. with FX/Tray. Overall
dimensions shall be 11-5/16 in. wide, 10-5/8 in. high, and 9-3/4 in. deep. However, Special FX/Case will only add
2-5/16 in. to overall length of original Ellipsoidal spotlight. Case will provide a drop-in iris slot. Finish on entire unit
(except shutters) shall be flat black powder coated. Special FX/Case SX4®with shutters shall be model number
TS6200FS as manufactured by GAMPRODUCTS, INC. of Los Angeles, California.
|
