TwinSpin™ Description
A variable speed double pattern rotator using silent drive belts to rotate two patterns in opposite directions. Designed for use in ellipsoidal spotlights for projected effects, using 'B' size patterns.
TwinSpin™ Specifications
Low voltage motor is mounted on vibration pads which minimize noise transmission to 20 gauge stainless steel plates. Motor is offset away from the hot air flow, and drives two special hi-temp belts to quietly rotate two gobo rings in opposite directions. Gobo rings have a groove to receive drive belts around the edges, and a machined recessed groove to hold gobo pattern and spring steel retaining ring in place. Teflon glides are placed between gobo rings and between gobo rings and outer housing to ensure quiet, smooth operation.
The variable speed motor can be controlled by almost any dimmer, and needs no special cables or controller. Motor is powered by UL approved power transformer. The unit may be programmed from a standard light board and controlled as a part of a light cue. Power requirement: 120VAC or optional 230VAC. Select either slow speed motor 0.3 to 3.0 rpm, or high speed motor 0.9 to 9.0 rpm. As manufactured by GAMPRODUCTS INC., Hollywood CA.
|
Click on image
for larger view
TwinSpin Jr.™
|
